Huawei OptiX OSN 8800 User Manual

OptiX OSN 8800/6800/3800
Hardware Description
4 OptiX OSN 8800 Subrack
Issue 01 (2016-03-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
Boar
d
Front Panel
Interface
Specification
Name
Conne
ctor
Type
Pino
ut
Description

The OptiX OSN 8800
provides for eight alarm
outputs. By default, the
first three alarm outputs
are defined as critical
alarm, major alarm, and
minor alarm. The other
five are reserved. Alarm
outputs can be cascaded.
For information about the
interface cables, see 33.2.1
Alarm Output Interface
Cable.
ALMI1
-ALMI
2:
housek
eeping
alarm
input
interfac
es
RJ45
Table
4-8
Table
4-9
The OptiX OSN 8800
provides for eight
housekeeping alarm inputs.
The user can manually
configure the severity of the
eight alarms for remote
monitoring of external
device alarms.
For information about the
interface cables, see 33.2.2
Alarm Input Interface Cable.
TN5
2STI
STI
CLK2
TOD2
CLK1
TOD1
CLK1-
CLK2:
clock
signal
input
and
output
interfac
es
RJ45
Table
4-10
CLK1/CLK2 interface can
input or output clock
signals. CLK1/CLK2
interface is bidirectional.
That is, they input and
output signals at the same
time.
TOD1/TOD2 interface can
input or output time signals.
At any time, a TOD1/TOD2
interface can either input or
output time signals.
For information about the
interface cables, see 33.4
Clock/Time Cable.

Dimensions
of front panel
(H x W x D):
80 mm (3.1
in.) x 50.8
mm (2.0 in.)
x 220 mm
(8.7 in.)

Weight: 0.3
kg (0.66 lb.)

Power
consumption:
Typical
power
consumption
(W): 1.5 W
Maximum
power
consumption
(W)
b
: 1.5 W
TOD1-
TOD2:
time
signal
input
and
output
interfac
e
RJ45
Table
4-11
TNL
STI
CLK2
TOD2
CLK1
TOD1
PHONE
F1
CLK1-
RJ45
Table
The two interfaces have the

Dimensions

Huawei OptiX OSN 8800 Specifications

General

Brand	Huawei
Model	OptiX OSN 8800
Category	Network Hardware
Language	English