PDU8000 Modular Precision PDC V2.0
User Manual
7 MDU Commissioning Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.5 Operating Status
On the main screen, tap Operating Status to access the screen and query the circuit breaker
status of the mains and branches.
Figure 7-65 Operating Status
7.6 DIP Switches
The DIP switches are located at the back of the MDU.
Figure 7-66 DIP switches
The following lists the functions of the DIP switches:
DIP1: Controls the CAN build-out resistor and is set to ON by default.
DIP2 to DIP4: Work together with specified buttons to clear historical records and logs
and restore factory settings.
To clear historical records and logs, you must log in as the admin user.
To Next Page
Loading...