Huawei PDU8000 Series - Preparing Terminals

PDU8000 Modular Precision PDC V2.0
User Manual
5 Installation Guide
Issue 03 (2018-01-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48
Wiring
Terminal
Rated
Current (A)
Recommende
d
Cross-Section
al Area (mm
2
)
Terminal/Bolt
Specifications
Recommended
Torque (N·m)
10 ≤ I ≤ 40
6
Cord end
terminal
(crimping screw
specification:
M4)
1.2
40 < I ≤ 63
10
Cord end
terminal
(crimping screw
specification:
M4)
1.2
AC output
(N/PE)
< 10
2.5
OT-M6
4.5
10 ≤ I ≤ 40
6
OT-M6
4.5
40 < I ≤ 63
10
OT-M6
4.5
5.4.3 Preparing Terminals
Figure 5-20, Figure 5-21, and Figure 5-22 respectively show how to prepare DT, OT, and cord
end terminals.
Figure 5-20 Preparing a DT terminal
(1)
Cable
(2) Heat shrink
tubing
(3) DT
terminal
(4) Electric hydraulic
pliers
(5) Heat
gun