Huawei PDU8000 Series - Replacing Hot-Swap MCB

PDU8000 Modular Precision PDC V2.0
User Manual
8 Maintenance Guide
Issue 03 (2018-01-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
130
Figure 8-9 Removing the MCB
Step 5 Install a new MCB.
Step 6 Connect cables. The recommended cable hole for the MCB is shown by (1) in Figure 8-10.
Figure 8-10 Mounting holes
(1) mounting holes
Step 7 Reinstall the panel on the PDC.
----End
8.4.4 Replacing a Hot-Swap MCB
Prerequisites

Tools: MCB extracting kit, Phillips screwdriver, key to the PDC door

Materials: new MCB