PDU8000 Modular Precision PDC V2.0
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Moving Heavy Objects
Wear protective gloves to protect hands when moving heavy objects.
Be careful to prevent injury when moving heavy objects.
It is recommended that tools such as a pallet truck be used to transport the heavy PDC.
2.5 Laying Out Cables
Binding Signal Cables
Signal cables must be bound separately from strong-current cables and high-voltage cables.
Laying Out Power Cables
When the temperature is very low, violent impact or vibration may damage the power cable
sheathing. To ensure safety, comply with the following requirements:
Power cables should be laid out or installed only when the temperature is higher than
0°C.
Store power cables for at least 24 hours at room temperature before laying out them if
they were previously stored at sub-0ºC.
Handle power cables with caution, especially at a low temperature. Do not drop the
power cables directly from the vehicle.
To Next Page
Loading...