Huawei PDU8000 Series - Capacity Expansion Settings

PDU8000 Modular Precision PDC V2.0
User Manual
8 Maintenance Guide
Issue 03 (2018-01-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
140
Figure 8-20 Synchronization dialog box
----End
8.5 Capacity Expansion Settings
Prerequisites
The PDC is configured with output modules that have hot-swap bases.

Install MCBs using the MCB extracting kit. Do not install MCBs barehanded.

Before installing an MCB, verify that it is switched to OFF.

Obtain the MCB extracting kit from the file box on the PDC front door.
Capacity Expansion Principles
The capacity expansion principles vary slightly for single- and dual-input scenarios.

In the single-input scenario, install MCBs for output modules from top down and from
left to right. Install MCBs fully for one output module before installing MCBs for the
next output module.

In the dual-input scenario, install MCBs for added output modules from top down. Verify
that the MCBs on the left and right sides are the same in number and capacity.