PDU8000 Modular Precision PDC V2.0
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Obtain the MCB extracting kit from the file box on the PDC front door.
Procedure
Step 1 Open the cabinet front door, and switch the MCBs to be installed to OFF.
Step 2 Remove the front panel of the output module.
Figure 8-11 Removing the front panel
Step 3 Push open the handles on both sides of the MCB.
Figure 8-12 Pushing open the handles
Step 4 Remove the MCB using the MCB extracting kit.
To Next Page
Loading...