PDU8000 Modular Precision PDC V2.0
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 3 Remove cables connected to the left and right sides of the MCB, as shown in Figure 8-7.
When removing cables, label the cables with corresponding terminal ports for later connection.
Figure 8-7 Removing cables
Step 4 Push the black clip of the MCB outwards. Then remove the MCB along the inner side of the
PDC, as shown in Figure 8-8.
Mark the MCB to ensure correct reinstallation.
Figure 8-8 Pushing the black clip
To Next Page
Loading...