6.5 Installing Input Power Cables
Step 1 Install input power cables.
● Before installing input power cables, ensure that all upstream power supplies
and downstream loads of the combiner cabinet are disconnected.
● When installing input power cables, ensure that the screw assemblies face the
same direction.
● The PE cable of the upstream input device can be grounded nearby or
connected to the PE bar in the combiner cabinet based on site requirements.
Figure 6-10 Installing input power cables (using one input as an example)
----End
6.6 Installing Output Power Cables
Step 1 Install output power cables.
● Before installing output power cables, ensure that all upstream power supplies
and downstream loads of the combiner cabinet are disconnected.
● The PE cable of the downstream output device can be grounded nearby or
connected to the PE bar in the combiner cabinet based on site requirements.
PDU8000 DC Combiner Cabinet
Quick Guide 6 Installing Cables
Issue 02 (2022-08-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 24
To Next Page
Loading...
