Huawei RRU - Figure 3-16 Installing the Cable Clip on the Tower

l The clip should be vertical to the cables and should not be bent. The cables fastened by the
same clip should be parallel, as shown in Figure 3-16.
l Figure 3-16 Installing the cable clip on the tower
l Do not fasten the screws on the clip until the cables are properly arranged and routed.
Figure 3-17 shows routing the cables in the cable rack.
3 Installing RRU and SRXU Hardware
RRU
User Guide
3-18 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2008-04-18)