Huawei SmartLi-ESM-24020P1 - Used with the UPS2000-H-6;10 KRTL-L (with a BBB Box); Installing Communications Cables

1.5.2 Used with the UPS2000-H-6/10KRTL-L (with a BBB Box)
NO TE
The method of installing cables for the UPS2000-H-6KRTL-L is similar to that for the
UPS2000-H-10KRTL-L. The gures in this section use the UPS2000-H-6KRTL-L as an
example. The number and colors of cables in the gures are for reference only.
1.5.2.1 Installing Communications Cables
Step 1 Install a communications cable between the battery module and the UPS.
Figure 1-34 Installing a communications cable between the battery module and
the UPS
(1) UPS
(2) Battery module
Step 2 If multiple battery modules are cascaded in a string, install parallel cables for the
battery modules.
Figure 1-35 Installing parallel cables between battery modules
SmartLi-ESM-24020P1
Quick Guide 1 Installation and Cable Connection
Issue 03 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 27