Huawei SmartLi-ESM-24020P1 - Used with the UPS2000-H-6;10 KRTL-L (Without a BBB Box); Installing Communications Cables

Figure 1-24 Cable routes for tower-mounted installation
(1) Battery module parallel cable (2) Communications cable between battery
modules and the UPS
(3) Power cable between battery modules (4) Power cable between battery modules and
the UPS
1.5.1 Used with the UPS2000-H-6/10KRTL-L (Without a BBB
Box)
NO TE
The method of installing cables for the UPS2000-H-6KRTL-L is similar to that for the
UPS2000-H-10KRTL-L. The gures in this section use the UPS2000-H-6KRTL-L as an
example. The number and colors of cables in the gures are for reference only.
1.5.1.1 Installing Communications Cables
Step 1 Install a communications cable between the battery module and the UPS.
SmartLi-ESM-24020P1
Quick Guide 1 Installation and Cable Connection
Issue 03 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 21