Huawei SmartLi-ESM-24020P1 - Power Cables

Cable Appearance Connector Type Remarks
● One end: COM_IN communications
port (connected to the battery
module)
● The other end: BATT.COM1
communications port (connected to
the UPS2000-H-6KRTL-L or
UPS2000-H-10KRTL-L)
Used to connect battery
modules to the UPS2000-
H-6KRTL-L or UPS2000-
H-10KRTL-L. The BOM
number of the cable is
04070006 (3 m),
04070009 (5 m),
04070012 (10 m), or
04070013 (20 m). The 3
m cable is delivered with
the battery module. The
5 m, 10 m, and 20 m
cables need to be
purchased separately
based on the site survey.
NO TICE
The communications cable between the battery module and the UPS must be a
shielded network cable with a maximum length of 20 m. If a non-shielded
network cable is used or the shielded network cable is long, communication will
deteriorate.
1.2.2.2 Power Cables
Cable Appearance
Connector Type Cable Cross-
Sectional Area
Remarks
● One end: PP45 terminal
(connected to the
battery module)
● The other end: PP45
terminal (connected to
the battery module or
BBB box)
2 x 12 AWG Used to connect
battery modules
or connect a
battery module to
the BBB box. The
BOM number of
the cable is
04152334 (within
0.5 m) or
04152334-001
(within 5 m),
which needs to be
purchased
separately.
SmartLi-ESM-24020P1
Quick Guide 1 Installation and Cable Connection
Issue 03 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 5