Figure 1-27 Incorrect connection
----End
1.5.1.2 Installing Power Cables
Procedure
Step 1 Remove the covers from the UPS wiring ports.
Step 2 Connect the PE cable, positive cable, and negative cable to the UPS in sequence.
Figure 1-28 Connecting power cables to the UPS
Step 3 Insert the cable terminal into the upper port of the battery module.
SmartLi-ESM-24020P1
Quick Guide 1 Installation and Cable Connection
Issue 03 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 23
To Next Page
Loading...
