Huawei SUN 2000 Series - 5.3 Connecting an AC Output Power Cable

SUN2000-4.95KTL-JPL0
User Manual
5 Electrical Connections
Issue 03 (2020-06-03)
Copyright © Huawei Technologies Co., Ltd.
32
Figure 5-3 Connecting a PE cable
To enhance the corrosion resistance of a ground terminal, apply silica gel or paint around the terminal
after connecting the PE cable.
----End
5.3 Connecting an AC Output Power Cable
Prerequisites
An AC switch must be installed on the AC side of the solar inverter to ensure that the solar
inverter can be safely disconnected from the power grid.
Do not connect loads between the solar inverter and the AC switch.
Procedure
Step 1 Connect the AC output power cable to the AC connector.