Huawei SUN 2000 Series User Manual

SUN2000-4.95KTL-JPL0
User Manual
1 Safety Information
Issue 03 (2020-06-03)
Copyright © Huawei Technologies Co., Ltd.
3

Professionals: personnel who are trained or experienced in equipment operations and are clear of the
sources and degree of various potential hazards in equipment installation, operation, and
maintenance

Trained personnel: personnel who are technically trained, have required experience, are aware of
possible hazards on themselves in certain operations, and are able to take protective measures to
minimize the hazards on themselves and other people

Operators: operation personnel who may come in contact with the equipment, except trained
personnel and professionals
1.3 Electrical Safety
Grounding

For the equipment that needs to be grounded, install the ground cable first when
installing the equipment and remove the ground cable last when removing the
equipment.

Do not damage the ground conductor.

Do not operate the equipment in the absence of a properly installed ground conductor.

Ensure that the equipment is connected permanently to the protective ground. Before
operating the equipment, check its electrical connection to ensure that it is securely
grounded.
General Requirements
Before connecting cables, ensure that the equipment is intact. Otherwise, electric shocks or
fire may occur.

Ensure that all electrical connections comply with local electrical standards.

Obtain approval from the local electric utility company before using the equipment in
grid-tied mode.

Ensure that the cables you prepared meet local regulations.

Use dedicated insulated tools when performing high-voltage operations.
AC and DC Power
Do not connect or disconnect power cables with power on. Transient contact between the core
of the power cable and the conductor will generate electric arcs or sparks, which may cause
fire or personal injury.

Before making electrical connections, switch off the disconnector on the upstream device
to cut off the power supply if people may contact energized components.

Before connecting a power cable, check that the label on the power cable is correct.

Huawei SUN 2000 Series Specifications

General

Type	String Inverter
Topology	Transformerless
Cooling Method	Natural convection
Rated Output Power	3-10 kW
MPPT	2
Communication	RS485
Output Power	3-10 kW
Output Voltage	230 V
Output Frequency	50 Hz / 60 Hz
MPPT Trackers	2
Operating Temperature	-25 °C ~ +60 °C