Huawei SUN 2000 Series - 8 Handling a Solar Inverter; 8.1 Removing a Solar Inverter; 8.2 Packing a Solar Inverter; 8.3 Disposing of a Solar Inverter

SUN2000-4.95KTL-JPL0
User Manual
8 Handling a Solar Inverter
Issue 03 (2020-06-03)
Copyright © Huawei Technologies Co., Ltd.
52
8 Handling a Solar Inverter
8.1 Removing a Solar Inverter
Procedure
Step 1 Power off the system.
Step 2 Disconnect all cables from the solar inverter, including the signal cable, DC input power
cables, AC output power cable, and PE cable.
Step 3 Remove the solar inverter from the mounting bracket.
Step 4 Remove the mounting bracket.
----End
8.2 Packing a Solar Inverter

If the original packaging is available, put the solar inverter inside it and then seal it using
adhesive tape.

If the original packaging is unavailable, put the solar inverter inside a suitable hard
carton and seal it properly.
8.3 Disposing of a Solar Inverter
If the solar inverter service life expires, dispose of it according to the local disposal rules for
electrical equipment and electronic component waste.