Huawei SUN2000-8K-LC0 Series - Creating a Plant; Downloading the Fusionsolar App

To Next Page

To Previous Page

Category Status Description

Communi

cation

indication

LED3 –

Blinking green fast (on for 0.2s and then o for

0.2s)

Communication is in progress.

Blinking green slowly (on for 1s and o for 1s) A mobile phone is connected

to the inverter.

O There is no communication.

Device

replaceme

indication

LED1 LED2 LED3 –

Steady red Steady red Steady red The inverter hardware is

faulty and needs to be

replaced.

NO TE

If o-grid overload occurs, the inverter indicators LED1 and LED2 will blink orange slowly.

You need to reduce the power of the o-grid loads, and manually clear the alarm or wait

for the inverter to automatically recover. The inverter attempts to restart every 5 minutes.

After three failed attempts, the retry interval changes to 2 hours. If the inverter is standby

in o-grid mode, check the inverter alarms and rectify the faults.

----End

7.2 Creating a Plant

7.2.1 Downloading the FusionSolar App

Method 1: Download and install the app from the app store.

● Huawei mobile phone users: Search for FusionSolar in Huawei AppGallery.

● iPhone users: Search for FusionSolar in the App Store.

● Other mobile phone users: Select method 2.

Method 2: Scan the QR code to download and install the app.

SUN2000-(8K, 10K)-LC0 Series

User Manual 7 Power-On and Commissioning

Other manuals for Huawei SUN2000-8K-LC0 Series