Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
If the external cable diameter ranges from 16 mm to 20 mm, remove a seal ring from the cable gland
before inserting the power cable into the cable gland and the adapter.
Figure 1-19 Connecting an AC output power cable (2)
Figure 1-20 Connecting an AC output power cable (3)
Step 4 Loosen the screws inside the coupling nut holes using a flat-head screwdriver, insert the core
wires into corresponding holes, and tighten the screws, as shown in Figure 1-21 and Figure
1-22.
Tighten the screws to a torque of 0.7 N.m.
Figure 1-21 Connecting an AC output power cable (4)
Connect L1 to the hole numbered 1.
Connect L2 to the hole numbered 2.
To Next Page
Loading...
