Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 1-24 Connecting an AC output power cable (7)
Step 7 Secure the cable gland to the adapter, as shown in Figure 1-25.
Tighten the cable gland to a torque of 5 N.m (You need to use some tool to achieve this
torque).
Figure 1-25 Connecting an AC output power cable (8)
Step 8 Connect the AC output connector to the bayonet coupling of the AC output wiring terminal on
the SUN2000 and rotate it clockwise until you hear a "click" sound, as shown in Figure 1-26.
Because no sufficient space is available on the right of the AC terminal, tighten the terminal
using the left hand.
Figure 1-26 Connecting an AC output power cable (9)
The AC output connector securely connects to the AC output wiring terminal after the
bayonet coupling snaps into place.
----End
To Next Page
Loading...
