Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-4 Stacked installation mode (not recommended)
The clearance between multiple SUN2000s must be increased to ensure proper heat
dissipation when they are installed in a hot area.
4.4 Support-mounting the SUN2000
When installing the SUN2000, the accompanying rear panel must first be secured to a support.
The SUN2000 is then secured to the rear panel using hexagon screws.
Context
Figure 4-5 shows the SUN2000 from the back.
To Next Page
Loading...
