Huawei UPS2000-G-6KRTLL - LCD Screen Information

No. Button Function
2 SELECT ● Go to the next item: Press
SELECT in setting mode to go to
the next item.
● Go to the setting screen: Hold
down SELECT for 1s on a non-
setting screen.
3 OFF/ENTER ● Shut down the UPS: Hold down
OFF/ENTER for more than 5s.
The UPS inverter shuts down.
The UPS transfers to bypass
mode when the mains is
available.
●
Conrm: In UPS setting mode,
press OFF/ENTER to conrm the
selection.
4 ON/MUTE+SELECT+OFF/ENTER Restore the initial password: Hold
down ON/MUTE, SELECT, and OFF/
ENTER at the same time for 3s on
the password login screen.
5 ON/MUTE+SELECT Exit: Press ON/MUTE and SELECT at
the same time to exit the current
screen (go to the upper-level menu
from the setting screen or go to the
default screen from the selection
screen).
4.1.3 LCD Screen Information
You can press SELECT to switch the information displayed on the LCD in sequence.
The information is displayed in the following sequence: input voltage, input
frequency, charge current, battery voltage, output voltage, output frequency, load
percentage, DC discharge current, battery SOH, battery SOC, AC discharge current,
and CPU version.
UPS2000-G-6KRTLL
User Manual 4 Control Panel
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 42