Huawei UPS2000-G-6KRTLL - Operating Modes

Name Display Description
Battery capacity test
enabled. This function
can be enabled only
when the battery SOC is
100%.
4.4 Operating Modes
NO TICE
● Standby mode: The UPS is not started, but it can charge batteries when there is
no AC output.
● Fault mode: The UPS enters the fault mode if there is an internal circuit fault or
external fault such as overtemperature or output short-circuit.
Table 4-7 Operating mode description
Operating
Mode
Description Display
Standby
mode
The UPS does not
supply power, but it
can still charge
batteries.
Charging batteries with mains power
Not charging batteries
UPS2000-G-6KRTLL
User Manual 4 Control Panel
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 56