Acronyms and
Abbreviations
Display Meaning
MON Month
NE New (not connected to
the parallel system)
NUM Set the number of
parallel UPSs
PAS Password input
rST Restore default settings
SBT Battery string sharing
SL Slave
VOT Voltage
YEA Year
< Less-than sign
4.3 Parameter Settings
Press and hold SELECT for 1s on a non-setting screen to access the login screen for
parameter settings. The initial password is 000001. Enter the correct password to
access the UPS setting mode. Press SELECT to select a parameter, and then press
OFF/ENTER to
conrm the setting.
If you forgot the password, press and hold ON/MUTE, SELECT, and OFF/ENTER at
the same time for 3s on the password login screen to reset the password.
You will be locked out after multiple failed attempts. For details, see the following
table.
UPS2000-G-6KRTLL
User Manual 4 Control Panel
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 46
To Next Page
Loading...
