Huawei UPS2000-G-6KRTLL - Page 55

Name Display Description
FSE: Manual alarm
clearance enabled. Ten
seconds after you exit
the setting screen, the
device restores the
initial status of manual
alarm clearance and
cancels alarms.
Maximum charge
current
● Default value: 10 A
● Value range: 10–60
A. The value is
incremented by 10 A
each time you press
SELECT.
Output voltage You need to shut down
the inverter before
changing the output
voltage.
220: The output voltage
is 220 V AC.
230: The output voltage
is 230 V AC (default).
240: The output voltage
is 240 V AC.
Number of
parallel UPSs
● Default value: 1
● Value range: 1–4
Battery discharge
time
● Default value: 0
hours (indicating
that this function is
disabled)
● Value range: 0–48
hours
UPS2000-G-6KRTLL
User Manual 4 Control Panel
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 49