UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Communication address when the northbound device queries CIM data.
Figure 4-58 shows the Advanced Param. screen.
Figure 4-58 Advanced Parameters
Specifications of the Hall effect sensor.
Determine whether the BCB connects to the CIM.
Determine whether BCB trips when batteries are not functioning properly.
The value of Multi-Hall cur. setting equals the number of positive or
negative Hall effect sensors in a single battery string and should be greater
than or equal to 1.
Figure 4-59 shows the battery string config screen. On this screen, the CIM No. and BIM
No. can be set under each battery string.
To Next Page
Loading...
