Description
These temperature control machines have been designed to be used with either external
closed systems (e.g. jacketed reactors) or the internal bath.
For temperature control devices with compressor cooling, the low internal volume
combined with high performance refrigeration and heating technology, gives a very
short cooling and heating time compared with conventional bath technology.
With the integrated speed controlled pump fitted in the table models and some floor
standing models, it is possible to control flow and / or pressure of the thermal fluid and
thus can be exactly adapted for the required application.
With help of the self optimising cascade controller, you obtain the optimum control
results under steady state conditions as well as by set point changes and with
exothermic reactions. One can choose between aperiodic or with a small overswing
(faster) control.
Information and temperature development can be easily read via the large graphic
display screen (with touch screen) as well as give command inputs.
A comfortable menu guidance eases the operation of the machine. The software
package Basic, Exclusive and Professional offer high functionality and comfort in usage
for users with simple temperature control tasks up to demanding temperature control
tasks. For a small extra charge the functionality can be extended by E-Grade. Here you
have the possibility to upgrade your package from Basic to Professional via an
activation key (please contact our Customer Support).
The optional Com.G@te with the digital interfaces RS232, RS485, the analogue 0/4-
20mA or 0-10V interface as well as various digital in and output possibilities (all
according to the NAMUR), and fitted as standard, the machine (valid for Basic,
Exclusive and Professional) can be fitted without problem into many laboratory
automation systems.
The removable CC-Pilot can be used as a remote control.
External temperature control requirements can be easily met (requirement E-Grade
Exclusive or Professional) via the external Pt100 connection (NAMUR standard).
The integrated temperature-ramp function as well as the internal programmer
underline
the high level of operator comfort. The integrated programmer offers the possibility of 3
different temperature programs each with 5 program steps (E-Grade Exclusive) or 10
different temperature programs with a maximum of 100 steps (E-Grade Professional),
which can be made and then called up.
The thermostat uses an over-temperature protection in accordance with DIN EN 61010-
2-010, which is independent of the actual control circuits.
To Next Page
Loading...
