Intended Use and General Safety Instructions
Danger!
Non-intended use can result in considerable personal injuries and material damage.
No third persons are authorized to make any changes to the machine. The device
declaration becomes void, if any modification is carried out without manufacturers
consent. Only personnel trained by the manufacturer may carry out modifications,
repairs or maintenance work.
The following must be observed:
Always use the machine in a perfect working condition!
Only expert personnel may initially start-up and repair the device!
Do not bypass, bridge-over, dismantle or switch off the safety mechanisms!
The manufacturer is not liable for damages caused by technical changes
to the temperature control device, inappropriate handling and / or use of the
temperature control device without regard to the operating instructions.
The temperature control device is manufactured for commercial use only and may only
be used to maintain the temperature within the internal bath (does not apply for chillers)
and to maintain the temperature of reactors or other professionally expedient objects in
laboratories and industry. Suitable thermal fluids are used throughout the entire system.
The cooling or heating power is provided at the pump connections and in the bath itself
(does not apply for chillers). The technical specifications of the temperature control
device are determined in the data sheet. Operation must be prepared and carried out
according to the operating instructions. Any non-observance of the operating
instructions is considered as non-intended use.
The temperature control device corresponds to the state-of-the-art and the recognized
safety-related regulations. Safety devices are built into your temperature control device.
The device is NOT approved for use as a medical product!
This temperature control unit is NOT built as explosion-proof and is NOT
suitable for use in "ATEX" areas!
Foreseeable non-intended use:
- Activate the brakes for machines with rollers or roller support.
To Next Page
Loading...
