Set-point
A description on this menu point can be found in the chapter on the Compact menu.
Set-point limits
A description on this menu point can be found in the chapter on Compact menu.
Settings (others
)
Here, information concerning your application may be entered or read out. The values
input here will be considered when controller parameterisation is taking place (please
see chapter on Control parameters)
The following functions are available under the menu point Change thermal fluid:
1. Thermal fluid (choose thermal fluid)
2. Circulation volume (indication on volume to be temperature controlled)
3. Bypass usage
4. Show fluid (values and information on thermal fluid are being displayed)
5. Back
Under the menu point Bath selection different bath volumes can be chosen. Please
select accordingly.
Software version
Corresponds to Function F98 in the Function-no. menu.
The installed software version of the electronics are displayed.
Start & stop
A description on this menu point can be found in the chapter on Compact menu.
Start ramp
A description on this point can be found in the chapter on Compact menu.
Temperature control mode
A description on this menu point can be found in the chapter on Compact menu.
Temperature scale
It is possible to choose between °C, °F and K
petite fleur
Serial Number: 77507
LoadCode: 803261629
Create Conde : 708020946
CC-Pilot: V06.10.001
Jan 12 2010 16:38:15
Serial Number : 36
Control: V05.10.001 1201
Jan 12 2010 16:38:15
Serial Number : 747
Continue: Press Enconder
button
To Next Page
Loading...
