Firmware update:
Updates and error corrections are available from time to time. To carry out an update
put in a memory stick into the Web.G@te. Select the file to be updated and choose the
upgrade. Individual functions are indicated. When the update is finished, remove the
memory stick.
Important note: During the update, the network connection may not be interrupted, do
not remove the memory stick and do not switch off the electricity.
If, for any reason, the update should fail there is another update possibility. Please
contact our Customer Support.
Connection to a VPN server (VPN Settings)
There exists the possibility to connect to e.g the Huber Service Center via a VPN
connection (highly coded connection via the internet). This connection can only be
carried out via the Web.G@te!
Please contact our Customer Support to use this function.
To Next Page
Loading...
