Hubner FG 40 Series User Manual

Incremental Encoder FG 40
8
FG40_MANUAL-en_R12(2018-10-31)ID74490.doc
3 Technical Data
3.1 Type plates
Nameplates for different device variations are shown below
Encoder with one terminal box
Encoder with 2 terminal boxes (redundant version)
Encoder with 2 sinusoidal signals
The type plate is located on the outside of the housing and contains the following information:
 Manufacturer, Address
 Type, year of construction
 CE marking
 Serial number (S/N)
 Commission number (C/N)
 Pulse rate
 Protection class
 Power supply
 No-load current
 Outputs

Hubner FG 40 Series Specifications

General

Brand	Hubner
Model	FG 40 Series
Category	Media Converter
Language	English