Huion HS64 - 1.6 Pen Nib Replacement; 2. Product Basic Operation; 2.1 Using The Pen; 2.1.1 Hold the pen

HS64
14
/ 15 www.huion.com
1.6 Pen Nib Replacement
The nib will be wear off after using for a long time, then you need to replace a new
nib.
1.Use the pen nib clip to pull the old nib straight out of the pen.
2. Insert a new pen nib into the stylus pen and push the nib until it stops.
2. Product Basic Operation
2.1 Using The Pen
2.1.1 Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can
toggle the side switch easily with your thumb or forefinger. Be careful not to
accidentally press the switch while drawing or positioning with the pen.
Notice：When not in use, place the pen in the pen case or on the desk. Do not place
the pen on the surface of screen, which may interfere with the use of other screen
cursor positioning equipment, may also cause your computer can not enter the