SR05-D1A3-PV manual v1801 39/83
address. Once the Modbus address is set, click “Connect” to establish contact with the
instrument.
Note: the “Auto-detect Hukseflux” option in the “Sensor type” drop down
box, the “Find First” button and the “Find All” button only work for standard
Hukseflux sensors and will not work for model SR05-D1A3-PV.
Figure 6.1.3.2 Sensor Manager main window with two connected SR05’s.
When an instrument is found, temperature and irradiance data are displayed. Updates
are done manually or automatically. Automatic updates can be made every second, every
5 seconds or every minute.
6.1.4 Sensor Manager: plotting data
When the “Plot on Live Chart” button in the lower right corner is clicked the “Plot
window” opens. A live graph is shown of the measurement with the selected instrument.
The x-axis, time, is scaled automatically to display data of the complete measurement
period. After checking the box “Show tail only”, only the last minutes of measured data
To Next Page
Loading...