SR05-D1A3-PV manual v1801 40/83
are displayed. When the “update interval” is 1 second, the “Show tail only” function is
available after around 10 minutes of data collection. The y-axis displays the measured
irradiance in W/m
2
. The Y-axis automatically scales to display the full measured range.
Figure 6.1.4.1 Example of an SR05 irradiance plot in the Sensor Manager.
6.1.5 Sensor Manager: information about the instrument
The main window shows the “Show details” button, giving access to the “Sensor details”
window. This window displays calibration results and calibration history, temperature
coefficients and other properties of the selected instrument, as shown on the next page.
The sensor serial number and all calibration information should match the information on
the instrument label and on the product certificate.
To Next Page
Loading...