SR05-D1A3-PV manual v1801 8/83
SR05-D1A3-PV design
SR05 pyranometers employ a thermopile sensor with black coated surface, one dome
and an anodised aluminium body with visible bubble level. Optionally the sensor can be
delivered with a unique ball levelling mechanism and tube mount or dedicated mounting
fixture, for easy installation. SR05-D1A3-PV has an industry standard digital output:
Modbus RTU over half-duplex RS-485, that allows multiple sensors to be installed on a
single network. In addition, SR05-D1A3-PV has analogue 0 to 1 V output.
Figure 0.3 On the left SR05-D1A3-PV pyranometer with bubble level and M12-A cable
connector in its standard configuration (3 metre cable standard included); on the right
SR05 with optional ball levelling, for easy mounting and levelling on (non-)horizontal
surfaces (included mounting bolts not displayed)
Figure 0.4 SR05-D1A3-PV digital second class pyranometer with optional ball levelling
and tube mount for easy mounting and levelling on a tube (tube not included)
To Next Page
Loading...