EasyManua.ls Logo

Hummer 2008 H2 - How to Inspect the Engine Air Cleaner;Filter

Hummer 2008 H2
504 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Inspect the Engine
Air Cleaner/Filter
Vehicles With an Air Filter
Restriction Indicator
Locate the air filter restriction indicator on the engine
air duct. When the indicator turns black or is in the
red/orange change zone, replace the filter and reset the
indicator. See “Inspecting the Engine Air Cleaner/Filter
and Resetting the Air Filter Restriction Indicator” later in
this section for further instructions.
Vehicles Without an Air Filter
Restriction Indicator
To inspect the air cleaner/filter, remove it from the
vehicle and lightly shake the filter to release loose dust
and dirt. If the engine air cleaner/filter remains caked
with dirt, a new filter is required. See “Inspecting the
Engine Air Cleaner/Filter and Resetting the Air Filter
Restriction Indicator” later in this section for further
instructions.
Inspecting the Engine Air Cleaner/Filter
and Resetting the Air Filter Restriction
Indicator
1. Loosen the screws on the engine air cleaner/filter
cover.
5-19

Table of Contents

Other manuals for Hummer 2008 H2

Related product manuals