Removing the Spare Tire and
Tools (SUT)
The jack is stored in the rear cargo compartment on
the passenger side of the vehicle. The tools for the
jack are stored under the rear passenger’s seat.
To remove the tools:
1. Locate the tools by lifting the driver’s side
second row seat up to expose the floor.
See Split Folding Rear Seat on page 1-8 for
more information.
2. Remove the strap from the seat rail. Then carefully
slide the tool bag out from under the seat rail as
shown.
Take care to not pinch the seat cables or electrical
harnesses.
3. Open the tool bag. You will find the following tools
needed to remove the spare tire and flat tire:
5-80
To Next Page
Loading...
Need help?
General
