Q(Lock): Press Qto lock all the doors.
If enabled through the Driver Information Center (DIC),
the turn signal lamps will flash once to indicate
locking has occurred. If enabled through the DIC,
the horn will chirp when Qis pressed again within
three seconds of the previous press of the lock button.
See DIC Vehicle Customization (With DIC Buttons)
on page 3-63 for additional information.
Pressing
Qwill arm the content theft-deterrent system.
See Content Theft-Deterrent on page 2-24.
" (Unlock): Press " to unlock the driver’s door. If " is
pressed again within three seconds, all remaining doors
will unlock.
If it is dark enough outside, your interior lamps will
come on and stay on for 20 seconds or until the ignition
is turned on. If enabled through the DIC, the turn
signal lamps will flash twice to indicate unlocking has
occurred. See DIC Vehicle Customization (With DIC
Buttons) on page 3-63. If enabled through the DIC,
the exterior lights will turn on briefly if it is dark enough
outside. See “APPROACH LIGHTING” under DIC
Vehicle Customization (With DIC Buttons) on page 3-63.
Pressing
" on the RKE transmitter will disarm the
content theft-deterrent system. See Content
Theft-Deterrent on page 2-24.
You can lower the windows by pressing and holding
"
on the RKE transmitter. See Power Windows on
page 2-20 for additional information.
If you use the RKE transmitter to enter your vehicle and
the remote recall memory feature is on, automatic
seat and adjustable mirror movements may occur.
To use this feature again, you must first perform a recall
to the other memorized position or use the easy exit
feature. See “MEMORY SEAT RECALL” under
DIC Vehicle Customization (With DIC Buttons) on
page 3-63 for additional information.
L(Vehicle Locator/Panic Alarm): Press and release
L to locate your vehicle. The turn signal lamps will
flash and the horn will sound three times.
Press and hold
Lfor more than two seconds to
activate the panic alarm. The turn signal lamps will flash
and the horn will sound repeatedly for 30 seconds.
The alarm will turn off when the ignition is moved
to RUN or
Lis pressed again. The ignition must be in
OFF for the panic alarm to work.
2-6
To Next Page
Loading...
Need help?
General
