105
Sonar
Settings: Off, On, Default = On
Sonar deactivates Sonar and removes the Sonar Views from the view
rotation.
Demonstration
Settings: Off, Visible; Default = Visible
Demonstration controls whether the Demonstration Mode is visible or off.
The Demonstration Mode appears on the screen if you don’t press any keys
during the warning screen at power up. Menu settings cannot be saved in
Demonstration (see Power On the Control Head and Start-Up Options
Menu).
Sound Control
Settings: No Sounds, Alarms Only, All Sounds;
Default = All Sounds
Sound Control allows you to set when the control head will beep or sound
because of key presses and/or alarms.
Video Out
Settings: Domestic Models: NTSC, Off;
International Models: NTSC, PAL, PAL M, Off;
Default = Off
Video Out allows you to set the video format that will be sent to your remote
monitor.
Views Menu Tab
From any view, press the MENU key twice to
access the tabbed Main Menu, then press
the RIGHT Cursor key until the Views tab is
selected.
This menu tab allows you to set the available
views to hidden or visible in the view
rotation. The view will be removed from the
view rotation if it is set to Hidden and will be
displayed in the view rotation if it is set to
Visible.
NOTE: See Views for more information.
898c SI, 998c SI
Views Menu
The down arrow indicates more
menu options. Press the DOWN
Cursor key to scroll through the
full menu list.
Setup Menu Tab, Views Menu Tab
To Next Page
Loading...
Need help?
General
