182
Manage your Navigation Data
Set the Waypoint Icon Default
Use the following instructions to set the waypoint icon category and the waypoint icon for all new waypoints.
NOTE: If the Waypoint Management dialog box is open, press the EXIT key to close the dialog box, and proceed with the following
instructions.
1. Main Menu: Press the MENU key twice. Select the Nav tab.
2. Select Waypoint Settings. Press the RIGHT Cursor key.
3. Use the Cursor Control key to set your new waypoint preferences.
Icon Category
Select All to view all available icons. (All, Geometry, Alerts, Supplies, Navigation, Recreation,
Fish, Environment)
Default Waypoint
Icon
The available icons are determined by the category selected in Icon Category.
New Waypoint
Icon
Default: When you mark a waypoint, the waypoint will be marked using the settings.
Select: Each time you mark a waypoint, you will be prompted to change the waypoint icon and
category. To accept the current settings, press the MARK key again. See Waypoints: Mark and
Edit Waypoints (on-the-go) in the Navigation section.
4. Save: Select Save. Press the RIGHT Cursor key.
Delete a Waypoint
1. Select a waypoint. Press the RIGHT Cursor key.
2. Select Delete. Press the RIGHT Cursor key.
3. To remove the waypoint from the group, choose Selected.
To delete the waypoint from all groups, choose All Instances.
4. Follow the on-screen prompts to delete the waypoint.
To Next Page
Loading...
Need help?
General
