152
Track AIS Targets
You can turn on tracking for all targets. You can also select individual targets and turn tracking on or off.
Turn on/off Automatic AIS Tracking
When Automatic AIS Tracking is turned on, all AIS targets are tracked within the equipment’s capabilities.
When Automatic AIS tracking is turned off, all AIS targets are not tracked, but you can still track targets individually (see Track a
Selected Target).
1. From the Home screen, select the Targets tool.
2. Select Settings > Automatic AIS Tracking. Tap the on/off button, or press the ENTER key.
N
OTE: If Automatic AIS Tracking is turned on, but you do not see AIS targets on the Chart and Radar Views, make sure targets are
set to display in the Overlays menu. See Display AIS and MARPA Targets.
Track a Selected Target
If Automatic AIS Tracking is turned off, you can select a target and track it individually. If
Automatic AIS Tracking is turned on, Track Target (for individual target tracking) is not available
in the menu system. See Turn on/off Automatic AIS Tracking for more information.
1. From the Home screen, select the Targets tool.
2. Under Lists, select AIS.
3. Press and hold a target, or use the Joystick to select it.
4. Select Track Target. Tap the on/off button, or press the ENTER key, to turn it on.
Cancel Tracking for a Selected Target
1. From the Home screen, select the Targets tool.
2. Under Lists, select AIS.
3. Press and hold a target, or use the Joystick to select it.
4. Select Track Target, and turn it off.
Change all Targets to Inactive (X-Press Menu)
Use the instructions in this section to cancel tracking from the X-Press Menu. This menu is available if Automatic AIS Tracking is
turned off but individual targets are being tracked (see Track a Selected Target).
1. With a Chart View or Radar View displayed on-screen, tap Chart or Radar in the status bar. Select Info.
OR
Press the ENTER key.
2. Select AIS: All Inactive.
Change all Targets to Inactive (Targets Tool)
Use the instructions in this section to cancel tracking from the Targets tool. This menu is available if Automatic AIS Tracking is
turned off but individual targets are being tracked (see Track a Selected Target).
1. Press the HOME key.
2. Select the Targets tool.
3. Select Cancel All AIS Targets.
AIS
To Next Page
Loading...
Need help?
General
