75
Introduction to Navigation
NAVIGATION MENU OVERVIEW
W
hether you have a Cross Touch Model or a Non-Tactile keypad control only model, there are many ways to use the navigation
f
eatures on your control head. The Navigation X-Press Menu and Cursor menu are opened using the touch screen. The same menus
a
re also opened by pressing the MARK key, GO TO key, or ENTER key.
Navigation X-Press Menu (Cross Touch Models Only)
The Navigation X-Press Menu allows you to open the following navigation menus: Mark, Go To, and Info. The Navigation X-Press
Menu is only available in Cross Touch models with the Chart View, Sonar Views, or Radar View displayed on-screen with Navigation
enabled.
Open the Navigation X-Press Menu
1. With a Chart View displayed on-screen, tap Chart in the status bar.
2. Select Mark, Go To, or Info.
3. Select an action from the submenu. For example, to mark a waypoint, select Mark > Waypoint.
Navigation
X-Press
Menu
Using the Touch Screen to Open the Navigation X-Press Menu (Cross Touch)
close
This section is an overview of the menus available for navigation. The availability of menu options is determined by the
navigation mode and your Humminbird model. To apply these functions, see Waypoints, Routes, Tracks, and Search.
To Next Page
Loading...
