201
Open the Video X-Press Menu
Open the Video X-Press Menu
1
. With a Video View displayed on-screen, tap Video in the status
bar.
OR
Press the MENU key once.
Display Cameras on the Video View
The ION control head allows you to display up to four video camera sources. The ONIX control head displays video from one camera
source.
Select a Camera Source to Display
1. From the Video X-Press Menu, select Camera.
2. Select a Camera Source (Camera 1, Camera 2, Camera 3, Camera 4).
If there is more than one camera connected, you can see the next camera in the rotation by moving the Joystick.
Next Camera: Move the Joystick to the right.
Previous Camera: Move the Joystick to the left.
Display Video Cycle
Set up Video Cycle to display the cameras in a timed rotation on the view.
1. From the Video X-Press Menu, select Video Cycle.
2. Select Cycle, and turn it on.
3. Cycle Timing: Press and hold the slider, or turn the Rotary dial, to change how long a video will display on-screen before the
next camera is shown.
4. Tap a camera number, or use the Joystick, to add it to the timed cycle. (check mark = visible, blank = hidden)
Video View
To Next Page
Loading...
Need help?
General
