22 hunter.help/P2C
Options for Running Your Irrigation System (continued)
One-Touch Manual Start and Advance
You can also activate a program to water without using the dial.
1. With the dial in the RUN position, hold down the → button
for 2 seconds.
2. This feature automatically defaults to program A. You can
select program B or C by pressing the PRG program.
3. The station number will ash. Press the ← or → button to
scroll through the stations and use the + and - buttons to
adjust the station run times.
4. Press the → button to scroll to the desired station. Aer a
2-second pause, the program will begin.
This feature is great for a quick cycle when extra watering is
needed or if you would like to scroll through the stations to
inspect your system.
To Next Page
Loading...
