6
Outdoor model is water- and weather-resistant.
Connecting the outdoor Pro-C Controller to the
primary power should be done by a licensed
electrician following all local codes. Improper
installation could result in shock or re hazard. This
device is not intended for use by young children.
Never let children play with this device.
Note
hunter.help/P2C
Mounting the Controller to a Wall
All necessary hardware is included for indoor and
outdoor installations.
1. Use the hole at the top of the controller as a reference
and secure a 1" (25 mm) screw into the wall. Note: Install
screw anchors if attaching to drywall or masonry wall.
2. Align controller with the screw and slide the keyhole
on top of the controller over the screw.
3. Secure controller in place by installing screws in the
holes.
To Next Page
Loading...
Need help?
General
