53
The PSC-Z Display ...........................................
The PSC-Z’s clear, easy-to-read display shows time and day when the
controller is idle. By pressing the Station button, you can check the
watering schedule for any station.
SEASONAL
ADJUST
Switch from Program A to
Program B
Manually run a single
station
• Pause watering during
automatic runs
• Cancel a manual run
• Go back to time and day
display when programming
Run an entire program
including all repeat cycles
Stop or restart automatic
program watering
Move blinking cursor left or
right when programming
Increase or decrease numbers
when programming
LAST
NEXT
Increase or decrease all
watering times
Set current time and day,
AM/PM or 24 hour
Program a station for
automatic watering
Set time that Program A
and/or B will start
watering
Set days you don't want
watering to occur
A
B
ONE
STATION
ALL
STATIONS
END
CANCEL
STATION
START
TIMES
NO
WATER
DAYS
Station number
No. of cycles per day
(up to 14 per program,
28 total per station)
2 separate programs,
A and B
Next day
to water
Cycle lengths up
to 3 hours, 59 minutes
Days between
waterings (up to 14)
Seasonal
adjust
indicator
STATION
PROGRAM A
CYCLES
PER DAY
CYCLE TIME
DAYS
APART
NEXT WATER WED
Keypad Definitions............................................
TIME
DAY
To Next Page
Loading...
Need help?
General
