HunterDouglas Provenance - Page 7

INSTALLATION
5
Mount the Headrail
■ Orient the headrail so that the control side is located on the correct side.
■ Center the headrail underneath the mounting clips.
➤ Ensure that all the mounting clips on the headboard are oriented with the hook toward
the front and the release tab toward the window.
■ Starting with the center, tilt the headrail
and hook the mountingclips into the
front groove of the headrail.
■ Rotate the headrail upward and snap it
intoplace.
■ Make sure that all clips are attached
correctly and the headrail is secure.
Proceed to Install the Drapery Panel(s)” on page 8.
Outside MountInside Mount
Headboard
Front
Front
Mounting
Clip
Mounting
Clip
Headrail
Headrail
Hook into
the front
groove of
the headrail.
Hook into the front
groove of the headrail.
Snap Into Place
Snap Into Place