FILE MANAGER
3.4.3.4 COHMAHD
EXPLANATION
!EXAMPLES
REMARKS
VER.V09F
SECTION 3.4
CONT
CONT filename
Execute program with 'continue' option.
>CONT PROG1,COM
This will load and run the CP/M program
'PROG1 .CC:W.
The three character file type extension does not
have to be specified for .COM files but must be
included for HUNTER Basic files, for example, a
HUNTER Basic program has the name 'SORT.HBA',
the following would load and execute the program
via the Basic interpreter:
)CONT SORT .HBA
If at any time during execution of a program
initiated with 'CONT', HUNTER is switched off or
power down takes place, switching HUNTER on will
cause the program to continue execution from the
point at which power was removed.
Escape from 'CONT' mode during program execution
is made by pressing 'Control C' when
.l).Q.lifil: .i:,_
.Qff., and then pressing 'pwr' to power on while
keeping 'Control C' depressed. Two 'beeps'
should be heard, when the keys should be
released. Then enter the special security
number, the default for which is 56580.
If an error is made, the Hunter will 'beep' and
return to program execution.
PAGE 3 - 15
To Next Page
Loading...