Husky Hunter - Page 93

FILE MANAGER SECTION 3.5
3.5.3.37
FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3.5.3.38
FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3.5. 3.39
FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3.5.3.40 FUNCTION
CALL NO,
ENTRY
EXIT
REHARl!CS
3.5.3.41 FUNCTION
CAIL NO.
ENTRY
EXIT
REMARl!CS
3.5.3.42 FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
VEIL V09F
Set Random Record
36
DE=FCB address.
Random record field set.
Reset Drive
37
DE=dri ve vector.
None
HUNTER's filing system is reset.
Set up the RS-232 Serial Port
38
None
None
The software setup routine is entered to set up the
serial communications.
Initialise the Clock
39
None
None
The time and date buffer RAM is copied to the
clock,
Write Random with zero fill
40
DE=FCR address
A = directory code
The write random with zero fill operations is
similar to function 34, with the exception that a
previously unallocated block is filled with zeros
before data is written.
NOTE: on early HlJNTERs, this call was used for a
different function.
Initialise communications
41
None
None
This call allows configurc1tion of the
commur.ications exactly as the standard HlJNTE:R
initialise communications routine.
PAGE 3 - 40