FILE.MANAGER
3.5.3.43 FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3.5.3.44 FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3,5,3.45 FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3.5.3.46 FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
3.5.3.47 FUNCTION
CALL NO.
ENTRY
EXIT
REMARKS
VER.V09F
Serial Status
42
None
A = port status
SECTION 3.5
To test for pending serial input characters A=O for
no characters read else A is non-zero
Terminal emulation call
43
None
None
Enters terminal emulation mode
Wand input call
44
DE=Buffer Address
None
The Wand code is selected previously by setting the
bartype location according to wand code being read.
The code is read into the buffer. The user must
provide the buffer address and, in the first
location of the buffer, the user must provide the
maximum number of characters to be read into the
buffer. On exit, the second byte of the buffer
contains the number of characters that have been
placed in the buffer, followed by the wand
character's input.
Fetch key without echo
47
None
A = ASC code of character
Read the Clock
48
None
None
The time and date is copied from the clock into the
time and date buffer RAM (see section 9.7),
locations TENTHSEC to TENYR.
PAGE 3 -.111
To Next Page
Loading...